RailOptic® SFK FO rail foot cable
RailOptic® SFK LWL-Schienenfußkabel
RailOptic® SFK FO rail foot cable acc. to DB TL 416.0510, BayCom LWL 02
Standards
Technical specifications DB TL 416.0510,
Bayka RailOptic SFK company standard.
The cables are in compliance with EU LVD (Low Voltage Directive 2014/35/EU) and RoHS Directive EU 2002/65/EC - RoHS 2.0 and Regulation No. 1907/2006 (REACH).
Technical Data
| Fibre type single-mode fibre | E9...10 |
| Core diameter μm | 9 |
| Sheath diameter μm | 125 |
| Fibre attenuation dB/km | |
| at 1310 nm | ≤ 0.36 |
| at 1550 nm | ≤ 0.23 |
| Chromatic dispersion ps/[nm x km] | |
| at 1310 +30/-15 nm | ≤ 3.5 |
| at 1550 +30/-70 nm | ≤ 18 |
| Temperature ranges | |
| During laying, installing along the rail foot °C |
+5 to +25 (+35) |
| Additional laying specification must be observed starting from 25 °C | |
| operation °C | -25 to +60 |
| The specifications in the technical bulletins of DB AG apply for planning and construction. |
Application
RailOptic® SFK FO rail foot cables are suitable for the use in telecommunication systems. They are preferred for laying directly along the rail foot or other areas with vibration and impact loads. They are also suitable for laying in the ground, in trough channels and pipe conduits.
The laying of cables along the rail foot is an economical variation for cable systems for regional and branch lines, for site clearance and troubleshooting. Compared to traditional cable lines, the design and installation expense is considerably reduced, since no civil engineering work is required.
The installation can be carried out by qualified companies without special vehicles, tools and with standard rail foot clamps. The cable accessories (joints, final boxes) come from the standard program of Tyco Electronics.
Rail Optic ® SFK FO rail foot cables are universal and can be installed together with BayRail® Cu rail foot cables.
Type Designation Codes
| A | outdoor cable |
| D | loose tube, filled |
| Q | cable core dry filled, longitudinally watertight |
| (ZN) | non-metallic tensile reinforcement |
| (L)2Y | laminated sheath, transversally watertight |
| RG | steel wire armouring, rodent-proof |
| 2Y | outer sheath made of PE |
Special Designs
Design according to national and international standards
Design according to customer specifications
Design with limited tolerance of outer diameter on request
Order Example
RailOptic® A-DQ(ZN)(L)2YRG2Y 6x4 E9/125
RailOptic® SFK FO rail foot cable
RailOptic® SFK LWL-Schienenfußkabel
RailOptic® SFK FO rail foot cable acc. to DB TL 416.0510, BayCom LWL 02
Tensile force only valid when cable sheath and cable core involved.
The bending radius one-off is for professionally installed cables, unique molding over a stencil and a cable temperature >30 ° C.