BayMotion® Low capacitance motor connection cables
BayMotion® EMC-Flex acc. to Bayka company standard
Bayka company standard, EN 60228 (DIN VDE 0295),
flame-retardant according to IEC 60332-1-2.
The cables are in compliance with EU LVD (Low Voltage Directive 2014/35/EU) and RoHS Directive EU 2002/65/EC - RoHS 2.0 and Regulation No. 1907/2006 (REACH).
acc. to EN 60228 (DIN VDE 0295)
|Conductor class 5|
|Rated voltage U0/U kV||0.6/1|
Testing voltage kV
Cable temperature °C
permanent installation (min)
occasionally moved (min)
Permissible operating temperature (conductor) °C
permanent installation (max)
occasionally moved (max)
Copper stranded wire
bare, finely-stranded according to EN 60228, conductor class 5
4-core, all cores with same cross-section are stranded in one layer
double screening due to laminated aluminium foil + braid made from tin-coated copper wires
nominal value of optical covering 80 %
special PVC, transparent, lead-free, flame-retardant and selfextinguishing
Colours of cores acc. to HD 308/4
Phase conductor: Brown, black, grey
Protective conductor: Green-yellow
BayMotion® PE-insulated, low capacitance and double screened motor connection cable as power, control, connection and link cable for drive systems with frequency converter technology.
The low mutual capacitance of the cores and the low capacitance screen enable a lower-loss energy transfer than comparable PVC-insulated cables. The optimised, double screening enables fault-free operation in EMC-sensitive environments (electromagnetic compatibility).
The low capacitance motor connection cables are suitable for permanent laying in dry, moist and wet rooms under normal mechanical loads, and for occasional flexible use with free movement and without additional mechanical load.
Type Designation Codes
|2Y||core insulation made of polyethylene (PE)|
|C||braid made from copper wires|
|Y||outer sheath made of polyvinyl chloride (PVC), transparent|
|J||cable with green-yellow core|
|TT||outer sheath transparent|
Design according to national and international standards
Design according to customer specifications
Design with limited tolerance of outer diameter on request
2YSLCY-J EMC-Flex 4x120 TT