Cable according to CENELEC HD 603 S1 part 7E
halogen-free acc. to IEC 60 754-1
no corrosive gases acc. to DIN EN 50 267-2-3
no toxic gases acc. to DIN EN 50 305
The cables are in compliance with EU LVD (Low Voltage Directive 2014/35/EU) and RoHS Directive EU 2002/65/EC - RoHS 2.0 and Regulation No. 1907/2006 (REACH).
They are free of silicone, cadmium and free from substances harmful to the wetting properties of lacquers.
|Al conductor, bare, sector-shaped, solid|
|Conductor insulation, cross-linked polyethylene, XLPE|
Core marking acc. to HD 603 S1 part 7E
|Inner covering (extruded bedding) with separating strip against bonding|
|Outer conductor Cu wires, ceander design, with Cu counter helix|
|Outer sheath made of halogen-free, robust PE|
Wear-resistant cable marking
2 yellow longitudinal strips, BAYKA, year / month of manufacture, 0.6/1 kV, metre marking
|Rated voltage U0/U kV||0.6/1|
|Conductor resistance (direct current at 20 °C)||acc. to IEC 60228|
Testing voltage (AC voltage, 5 min) kV
acc. to HD 603.1
Temperature ranges °C
emergency operation (less than 8 h/d, less than 100 h/a)
Suitable for installation in the ground, in protective conduits, cable ducts, in open air, for power stations, industry and distribution boards or low-voltage distribution systems.
Due to the cross-linked conductor insulation, particularly suitable for higher temperatures in the case of a short-circuit or overload. The PE sheath of the BayEnergy® LV mains cables is particularly robust and distinguishes itself with excellent mechanical properties and increased thermal compressive strength.
Type Designation Codes
|X||conductor insulation, cross-linked polyethylene, XLPE, halogen-free|
|K||concentric outer conductor/screen made of copper|
|N||halogen-free sheath made of polyethylene, PE|
|Alse||Al conductor, sector-shaped, solid|
Design according to national, international and customer standards
XKN 3x150 Alse/95 Cu 0,6/1kV (3LPEN)
Other designs, fitted lengths and larger delivery lengths on request.
Tensile force only valid when cable sheath and cable core involved.
The bending radius one-off is for professionally installed cables, unique molding over a stencil and a cable temperature >30 ° C.